Loading... Please wait...

Stepper motor driver, DRV8825, with heat sink

Hover over image to zoom

  • Stepper motor driver, DRV8825, with heat sink
  • Stepper motor driver, DRV8825, with heat sink
R99.95 (inc VAT) R86.91 (exc VAT)
0.01 KGS
Current Stock:

 Product Description

DRV8825 is a drop in replacement for the A4988 bipolar stepper motors driver.  There are two main advantages of this driver, it can supply up to 2.2A output current to the stepper motor and it can go down to 1/32 step microstepping. This stepper driver takes the A4988 driver to the next level.

Comes with heat sink.

Features and Benefits:

  • Simple step and direction control interface
  • Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
  • 45 V maximum supply voltage
  • Built-in regulator (no external logic voltage supply needed)
  • Can interface directly with 3.3 V and 5 V systems
  • Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
  • Short-to-ground and shorted-load protection
  • 4-layer, 2 oz copper PCB for improved heat dissipation
  • Exposed solderable ground pad below the driver IC on the bottom of the PCB
  • Module size, pinout, and interface match those of our A4988 stepper driver in most respects

 Find Similar Products by Tag

 Find Similar Products by Category

 Product Reviews

  1. Great stepper driver!

    Posted by Pierre on 18th Sep 2017

    Runs very smoothly in 1/32 step microstepping mode.

  2. More resolution

    Posted by Ross on 19th Feb 2016

    Allowed me to work with microsteps of 1/32 doubling my resolution.

  3. Feature-rich stepper driver

    Posted by Unknown on 29th Jan 2016

    Satisfied with performance driving NEMA 17 0.5Nm 1.8deg stepper motor with 14v supply current limited to 0.2A.Tested with Arduino library 'AccelStepper' (AccelStepper::Driver - 2 wire i/f).

    With miniature heatsink fitted, thermal management may be an issue with (trimpot-set) current limit >1A.

    Good microstepping performance to 1/32 step resolution (refer TI DRV8825 datasheet for h/w configuration).

You Recently Viewed...


What's News


Follow us on

Copyright 2020 3D Printing All Rights Reserved.
 Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Stepper motor driver, DRV8825, with heat sink to your wish list.