Loading... Please wait...

Monocure Rapin Resin, 1ℓ, Clear

Hover over image to zoom

  • Monocure Rapin Resin, 1ℓ, Clear
  • Monocure Rapin Resin, 1ℓ, Clear
  • Monocure Rapin Resin, 1ℓ, Clear
  • Monocure Rapin Resin, 1ℓ, Clear
  • Monocure Rapin Resin, 1ℓ, Clear
  • Monocure Rapin Resin, 1ℓ, Clear
  • Monocure Rapin Resin, 1ℓ, Clear
  • Monocure Rapin Resin, 1ℓ, Clear
R1,199.95 (inc VAT) R1,045.43 (exc VAT)
1.10 KGS
Current Stock:
Currently out of stock

Sorry but this item is currently unavailable. Please check back at a later stage.

 Product Description

Monocure Rapid resin for low power resin printers.  Delivers a smooth finish with very little post processing and short exposure times.  Low odour and easy to work with.


  • RAPID RESIN was designed specifically for low powered LED/LCD DLP printers like the Wanhao Duplicator 7, AnyCubic Photon & SparkMaker.
  • Large range of colours to choose from.
  • Enhanced Toughness & Durability at Shore D - 70 (Hard Hat is 80), smooth when cured.
  • A non-yellowing formula and requires very little post-curing.
  • Is designed for high-resolution parts and display very low shrinkage properties <0.5%>
  • Will curing under UV lights with Wavelengths up to 420nm - SLA UV Laser or LED's & DLP Projector.
  • Made from the highest quality materials and draw on 30 years of UV formulation experience.
  • Has very low odour & VOC emission.
  • RAPID Resin has a viscosity reading of 300 - 400 CPS and have been successfully tested on a range of SLA & DLP printers. 


  • Volume: 1 liter
  • Colour: Clear (Transparent)
  • Container: Plastic
  • Clean after print with IPA (Iso Propanol Alcohol) 


Product safety datasheet can be found at this link.

 Find Similar Products by Tag

 Find Similar Products by Category

 Product Reviews

  1. Excellent Resin

    Posted by Unknown on 17th Oct 2018

    Parts come out with a sandblasted clear glass look. UV does yellow the resin, but this disappears after a few days. The resin seems very accurate and supports come out crisp.

    This is not the strongest resin though. Small (< 2mm) features are brittle and can break quite easily.

    Heat is also a massive issue when not fully cured resulting in severe cracking of the part. Use ONLY UV LEDs to cure, leaving this in the sun for even 10 minutes can result in the part completely breaking apart. Once cured heat and sun don't seem to influence it much although UV will cause temporary yellowing.

You Recently Viewed...


What's News

  • Flexible Filament

    We received the flexible filament some time ago and had some great fun …


Follow us on

Copyright 2019 3D Printing Store.co.za. All Rights Reserved.
 Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Monocure Rapin Resin, 1ℓ, Clear to your wish list.