Creality Water Washable UV Resin, 500g, Grey

Creality Water Washable UV Resin, 500g, Grey

Creality Water Washable UV Resin, 1kg, Black

Creality Water Washable UV Resin, 1kg, Black

Creality Water Washable UV Resin, 500g, Transparent

R499.95 R434.74
Selected Store: Centurion Store : 33 In Stock
Boksburg Store : 6 In Stock

SKU
CRE114

Creality water washable UV resin is a high quality resin designed for LCD resin 3D printers with the big advantage that it can be washed off with water instead of alcohol.  This resin is usually slightly more expensive than the standard resin, but you do have to spend money on alcohol and work with chemical which effect your skin.  

This resin works with LCD based UV resin printers working at 405nm.  It is designed with a fast curing time, high stability and low shrinkage.  The result of this is accurate smooth parts that can be used in a wide variety of applications.  This resin is specifically designed for the Creality range of 3D printers, but can also be used on other LCD resin printers, like the Anycubic, Wanhao, Elegoo, Phrozen, Geetech, Nova3D and Sparkmaker 3D printers.

The resin comes in a strong metal bottle which keeps all light away from the resin and is very well packaged in protective plastic bubble wrapping inside the box.

Spesifications:

  • Colour: Transparent
  • Amount: 500g
  • Curing frequency: 405nm
  • Shelf life: 12 Months
  • Hardness: 85-88 Shore D
  • Viscosity (@25): 200-350MPa.s
  • Shrinkage: 3.62 - 4.24%

Storage instructions:

  1. Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
  2. It is recommended to save at 15℃ -35℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin. 

Usage instructions:

  1. Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
  2. Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
  3. Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
  4. Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
  5. Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).
  6. Resin has a shelf life of up to 18 months
More Information
SKUCRE114
Length22.0000
Width10.0000
Height10.0000
Weight0.7000
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account